published date : jan 21,2008 drawing no : xdsa9524 v3 checked : b.l.l iu p.1/4 3.2mmx1.6mm smd chip led lamp part number: XZBGA55W-A2 part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. XZBGA55W-A2 green ingan water clear 280 447 520 70 notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.1(0.004") unless otherwise noted. 3.specifications are subject to change without notice. features z 3.2mmx1.6mm smt led, 1.1mm thickness. z low power consumption. z wide viewing angle. z ideal for backlight and indicator. z various colors and lens types available. z package : 2000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. preliminary spec attention observe precautions for handling electrostatic discharge sensitive devices absolute maximum ratings (t a =25c ) bga (ingan) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 100 ma power dissipation p t 120 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 1000 v electrostatic discharge threshold (hbm) operating characteristics (t a =25c ) bga (ingan) unit forward voltage (typ.) (i f =20ma) v f 3.2 v forward voltage (max.) (i f =20ma) v f 4.0 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 520 nm wavelength of dominant emission (typ.) (i f =20ma) d 525 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 35 nm capacitance (typ.) (v f =0v, f=1mhz) c 100 pf
published date : jan 21,2008 drawing no : xdsa9524 v3 checked : b.l.l iu p.2/4 3.2mmx1.6mm smd chip led lamp part number: XZBGA55W-A2 ? bga
published date : jan 21,2008 drawing no : xdsa9524 v3 checked : b.l.l iu p.3/4 3.2mmx1.6mm smd chip led lamp part number: XZBGA55W-A2 ? tape specification (units : mm) remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity/ luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters. ? recommended soldering pattern (units : mm; tolerance: 0.1) ? the device has a single mounting surface. the device must be mounted according to the specifications .
published date : jan 21,2008 drawing no : xdsa9524 v3 checked : b.l.l iu p.4/4 3.2mmx1.6mm smd chip led lamp part number: XZBGA55W-A2 packing & label specifications XZBGA55W-A2
|
